SC2242 Automotive Grade Latch Hall Sensor IC

Datasheet

Description

The SC224X family, produced with BiCMOS technology, is a chopper-stabilized Hall Effect Sensor that offers a magnetic sensing solution with superior sensitivity stability over temperature and integrated protection features.
Superior high-temperature performance is made possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over molding, temperature dependencies, and thermal stress. Each device includes on a single silicon chip a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilization, Schmitt trigger, and an output circuit.
An onboard regulator permits with supply voltages of 2.5 to 24V which makes the device suitable for a wide range of industrial and automotive applications
The device is available in a 3-pin SIP package (UA) and a 3-pin SOT-23 style package (SO). Both are lead (Pb) free, with 100% matte tin lead frame plating.

Feature

  • Built-in pull-up resistor
  • High chopping frequency
  • Supports a wide voltage range
    -2.5 to 24V
    -Operation from unregulated supply
  • Wide operating temperature range
  • Factory-programmed at end-of-line for optimum
  • Reverse battery protection
  • Over-voltage protection at all pins
  • Solid-state reliability
  • Small package
    -3-pin SIP -(UA)
    -3-pin SOT23 -(SO)

Seal & Selection

Item Packing Seal Working Temperature Marking BOP(Typ.) BRP(Typ.)
SC2242UA 1000pcs/Bag SIP3 -40℃ to 150℃ 2242 +2.0mT -2.0mT
SC2242SO 3000pcs/Reel SOT23 -40℃ to 150℃ 2242 -2.0mT -2.0mT

Demo Boards

Tool & Source